by Barry Carter
Early in our work with the ORMUS materials Jim and I tried to solve some significant problems that we had with transporting them. Due to his "accident" Jim was quite sensitive to ORMUS in the air and he noticed that the ORMUS he was transporting would "blow off" whenever he drove under a high tension power line. This would happen even when the containers were sealed. We also noticed that the ORMUS was quite sensitive to moving magnetic fields and this knowledge lead to Jim's invention of the magnetic levitation traps.
One
time when I was visiting Jim at his "lab" he had me hold a
bottle of some ORMUS rhodium/iridium that he made from metal using his
proprietary ozone
technology. This liquid was in a Nalgene
bottle and
looked almost exactly like the bottle of Jim's ORMUS in the picture
below:
As I held the bottle Jim waved a magnet back and forth next to it like in the picture above and the one below:
Jim said that he could feel the magnet push and pull against the bottle as he moved it near the bottle. He asked me if I could feel this but I was not sure that I could. This prompted Jim to move the magnet more vigorously but I still was not certain that I felt anything. Then Jim had me spin the bottle over a speaker magnet like the one in the picture below:
I would turn the bottle and then pull it away from the magnet. Jim said I should feel the effect of the magnet but again I was not sure. Eventually Jim took a magnet and chucked it into an electric drill and held this under the bottle but I still was not sure I could feel anything. This process went on for a total of about five minutes.
We finally tired of this and turned around to look at some samples he had in the refrigerator behind us. When we turned back to the lab bench after a few minutes I noticed two or three small round drops of a clear sparkling liquid on top of the sealed bottle.
These Nalgene bottles are laboratory grade and were purchased at a scientific supply store. Since they are designed to provide a leak proof container for toxic and hazardous chemicals they have a really good seal built into the lid.
Knowing this, I asked Jim how the drops got on the top of the lid of the bottle. He answered that he thought it "tunneled" out. I asked him what he meant by "tunneled out". He told me that he thought this was the same thing as Josephson tunneling (which British physicist Brian Josephson got a Nobel Prize for discovering in 1973). Josephson discovered that paired electrons could "tunnel" through an electron barrier. There are mystical aspects of this tunneling in that Josephson's theory postulates that the electrons leave the absolute physical world and travel through a non physical quantum realm. Other scientists have demonstrated that quantum particles travel instantaneously when they tunnel.
I told Jim that I did not think that big stuff, stuff larger than electrons, could tunnel. Jim said "oh yeah, it happens all the time".
Well, being a careful scientific type person and not knowing what these drops of liquid which escaped the bottle were, I immediately put my finger in one of the drops. It felt oily when I rubbed my fingers together. Since nothing bad happened when I did this I immediately tasted the oily liquid. It tasted like the sweetest, most pleasant water that I had ever tasted. Like the sweet water from a spring coming out of the mountain side, only magnify this a thousand times.
Since the first time I put this substance to my lips they have felt "slick" every time I lick them and they have not chapped and split once. Before this they always used to chap and split in the dry part of the year. I can still taste the sweet taste when I lick them. This substance would match the Biblical description of the manna quite well.
This
experience taught me how sensitive the ORMUS elements
can be to spin fields and moving magnetic fields.
Over the years Jim and I have
developed some fairly effective ways to ship and store the energetic
ORMUS
materials.
We think that ORMUS elements at different energy levels require
different levels of shielding. Below is a picture of one of Jim's
"laboratory" storage systems for his high energy ORMUS:
The
storage system above has several interesting features. It starts with a
cheap steel file drawer. Jim would put a magnet on the outside of the
drawer and he kept several things in the drawer with the samples. The
magnet was put there because Jim noticed that ORMUS would tend to
retreat from magnetic fields. Jim's experiences with the "fly ash"
prompted this discovery. You can listen to a sound file with Jim's
comments on the white powder that would move away from his hands at:
http://www.subtleenergies.com/ormus/tw/flyashall.mp3
This
sound file also includes some comments from David Hudson and Michael
Burbury on their independent observatons of the same phenomenon.
Jim also kept other things in his storage cabinet to "trap" any ORMUS
that escaped from the sealed bottles it was stored in. For example, Jim
usually kept an unopened bottle of mineral oil in the file drawer. Over
time, the mineral oil in this sealed bottle would get clouds of what we
think is ORMUS in it. You can see a picture of these clouds in the
bottle of mineral oil below:
Jim also generally kept an unopened container of aluminum oxide
desiccant beads in the file cabinet with his samples. You can see some
of these beads in the picture below:
Notice the blue beads in with the white beads? These blue beads are
indicator beads and they turn pink when the beads have pulled in as
much moisture as they can.
The factory sealed container of desiccant beads reminded me of the new
plastic peanut butter or aspirin bottles that have an inner seal over
the top as illustrated below:
Over a few weeks time, the desiccant beads, in the fully sealed
container, would change color. The bottle of beads would also get
significantly heavier. Both of these effects suggest that the ORMUS was
somehow getting into the desiccant beads inside the factory sealed
container. The clouds in the mineral oil and the heavier desiccant
beads both suggest that Josephson tunneling is involved.
Also, based on these and other observations, we postulated that ORMUS
"likes to hide out" in tight spaces such as inside the pores of the
desiccant beads and inside the molecules of the mineral oil. I have
written an article on this theory that you can read at:
http://www.subtleenergies.com/ormus/tw/gasormus.htm
We also think that ORMUS in different chemical "boxes"
can be more or less sensitive to magnetic fields depending on which
chemical "box" it is in. For example salt water seems
to provide a very comfy (well shielded) space for ORMUS to hang out.
This could
be why ORMUS concentrates in the oceans and salty seas. Knowing this,
Jim would place a layer of rock salt in the bottom of the metal cans
that he kept the Nalgene bottles in as you can see below:
Jim also always added
salt to his ORMUS preparations as the first level of shielding.
When Jim and I first came up with the HCl/H2O2 method for
making ORMUS from gold on
Later
I repeated this experiment in my kitchen at home. Here is a picture of
the green "gold chloride" solution that I made back in 1997:
The first
time I made this I did not follow Jim's recommendation to add salt for
"shielding". Here is an excerpt from the
notes I wrote on 7/20/1997
about my subsequent experience:
"While I was stirring in the TSP and lye solutions I noticed that I was feeling quite high. It was a bit like a pot high, but without the distortion and memory loss that pot gives. I also noticed my lips were getting quite sweet and slippery. I asked Jim about this. His reply was that this is quite common when working with these materials. To avoid it you should put some pure, lab grade, sodium chloride in with your working solution. Without the salt, the m-state material will evaporate with the water and much of it will be lost.
When I reached pH 7 I slowed down to a drop by drop addition with the eyedropper. Despite my precautions, I overshot and took the solution up to pH 12 or higher. (Since there is not likely to be anything precipitating out of this solution but gold, I did not worry about producing a Gilcrest precipitate.) When the pH went up to 12 the solution quickly turned from a colorless transparent liquid to a candy apple red color which soon showed some red precipitate. I added some HCl to bring the pH back down to neutral but the color stayed. I gradually added lye water to bring the pH up to about 10 and then took the solution off the burner to cool.
During this process I was noticing that the "high" feeling was becoming more and more pronounced. It never caused any dysfunction but I decided that I should be very meticulous and careful to avoid doing anything clumsy."
I
did not do this process, without adding salt, again.
I still have some of the green "gold chloride" in the same flask
pictured above. I believe that this was made in 1997 too. I have kept
this sample in a galvanized steel garbage can that has a magnet on the
outside of the top. Below is a picture of this storage system with the
green "gold chloride" that was taken on April 12, 2008:
Jim also successfully stored samples in the old microwave oven pictured
below:
Based on these and other experiences Jim and I came up with a method
for shipping energetic
ORMUS across country that seems to work fairly well. Wrap a glass
bottle
containing a few ounces of ORMUS in aluminum foil. Wrap this in paper
or
plastic and place it in a new quart paint can. Seal the paint can and
wrap it
in plastic then in more aluminum foil. Wrap this in more plastic and
seal it in
a gallon paint can. You should stuff the paint cans with paper or foam
peanuts
to keep things from rattling around. Put the gallon paint can in a
cardboard box
for shipment. You can see some examples of the kinds of nested steel
cans that Jim and I have used below:
In
one case, when we sent a sample to Taiwan, we placed the nested cans in
a discarded microwave oven. Even this sample showed a bit of leakage
from the inner bottle when it was opened in Taiwan.
This process works quite well but one apparently does not
need to be this thorough when sending ORMUS which is not as energetic.
This
would apply to most of the products on the market. These are often
shipped in some
kind of aluminum foil wrapping. Though the aluminum foil does not
provide a
magnetic shield it does seem to shield from scalar (spin) fields.
The organic and metal layers in the packaging scheme may also create an orgone accumulator to energize the ORMUS. The description of the Ark of the Covenant in the Bible would suggests that it might serve well as a capacitor and orgone accumulator. Perhaps it was used to store, energize and transport the ORMUS manna.
Since salt provides some sort of a shield for the ORMUS there may be other substances which fill a similar role. Some ORMUS researchers believe that the ORMUS we see is generally in a chemical box which gives it some shielding from magnetic and spin fields. There is a bit of evidence that different chemical boxes can provide better shielding for the ORMUS elements than others. You can read more about my chemical box theory at:
http://www.subtleenergies.com/ormus/tw/what.htm
and at: